Is your showerhead holder broken and no more supporting your showerhead? This might put you in the situation of changing the whole showerhead set. But Hold on, you think too fast.
What if I say that the broken shower holder can be fixed and you don’t have to spend money purchasing a new showerhead set? That news really brings a smile to your face!
Well, That’s what this article is all about. It will give you a detailed step-by-step guide on how to fix broken shower head holder. So, sit back, relax, and let this article do wonders for you.
Without further ado, let’s get straight toward fixing a worn-out or broken shower head holder.
Read More: Best Shower Heads For Dogs
Can Your Showerhead Holder Live More Life?
If your shower head holder is not broken but just loose or capable of living more life with little maintenance, you don’t need to replace it. Because it can be fixed by doing some steps mentioned below, let’s take a look at them.
- Suppose your showerhead holder is getting loose. In that case, the best fix is to determine the place where you’re most comfortable and have the showerhead stay there for a while without allowing the holder to move unnecessarily. This way, you can get the most out of your holder until you don’t find the solution for it.
- If your shower head is adjustable, you slide through the riser rails and ensure they’re in good shape. Now, you have to slide the shower head holder again and secure it into the rails by just tightening the knobs on the sides.
On the other hand, if your shower head holder is broken, worn out, or has lived its due life, you need to throw it and install a new one in place of it. To know how to replace a broken shower head holder with a new one, the step-by-step guide below will help you.
How To Fix Or Replace A Broken Shower Head Holder? (Step-By-Step)
In order to replace a broken shower head holder, you have to purchase a new one in place of it. You can head on to Amazon, type in your showerhead model name, and then mention the bracket or holder at the end. It will show you multiple options.
Moreover, you can also visit the nearest retail shop to get a new shower head holder. Let’s head on to how to install a new shower head holder bracket?
Required Things
Tools help make the DIY tasks a piece of cake; ensure you have all these things mentioned below before starting the work.
- Adjustable Wrench and Pliers
- Old Piece Of Cloth
- Teflon or Plumber Tape
Step 1: Turn Off Water Supply
If you don’t turn off the water supply before replacing a shower head holder bracket, you will be drenched in the water once you remove it.
So, ensure the water supply is Off on the showerhead from the main source. It will make your task much easier by filtering out the involvement of water.
Step 2: Take Out Existing Shower Head
The first step comes with removing the existing showerhead from the bracket holder. You can use the adjustable wrench to remove it, but it can sometimes be done using your hands.
Twist the showerhead in the anticlockwise direction by using an adjustable wrench, and it will come out easily.
Step 3: Remove Old Shower Head Bracket
After successfully removing the showerhead, it’s time to take out the broken or old showerhead bracket.
Again use the adjustable wrench or pliers to remove the old shower head bracket. Rotate it in the anticlockwise direction to disassemble it from the shower arm.
Step 4: Clean Your Shower arm pipe
Remove the old Teflon tape from the threads of the shower arm pipe and clean it using the old cloth. For more profound cleaning results, splash a bit of water on the arm and squeeze it with the cloth.
Cleaning the shower arm helps install it back easily with the holder and restores its former glory.
Step 5: Apply Teflon Tape On Shower Arm
To install the new shower head bracket, you have to do the reverse of the process you did above. Firstly, wrap a new Teflon tape around the threads of the shower arm.
The tape helps provide a solid grip on the bracket and prevents water from leaking. So you must not miss applying Teflon Tape on the shower arm.
Step 6: Install New Shower Head Holder
After applying the Teflon Tape over the shower arm, install the showerhead bracket on it. Screw it in the clockwise direction with the help of an adjustable wrench on the shower arm.
After that, try scolding the holder to ensure it is installed firmly. Don’t forget to use a cloth while fixing to save the shower arm and holder from possible scratches.
Step 7: Reinstall The Shower Head
After the holder is installed successfully, install the showerhead hose on it. Tighten it slightly in the clockwise direction using the hands, and then use the wrench to tighten it firmly.
Shower hoses should have rubber hoses at the end of fittings, so make sure your one has this before installing it back. Use cloth during the process to prevent possible scratches.
Step 8: Test For Leaks
Before putting away your tools, run the showerhead to ensure there is no leaking and everything holds up properly.
If everything is fine and the showerhead is working smoothly without leaking, congrats, you have done a tremendous job.
However, if, unfortunately, you find some leaks, tighten that specific area using an adjustable wrench.
In the very least cases, if leaking is still there, you must apply more tape over threads and ensure the rubber washer is placed correctly behind the hose.
Frequently Asked Questions
Are All Shower Head Holders The Same Size?
The showerhead holders come in different shapes and sizes, depending on the type of brand. If you cannot find your brand’s shower head holder, you can opt for a universal shower head holder. It usually fits all types of models.
Do I Need To Apply Teflon Tape On Shower Arm Before Installing A Holder?
Yes, applying Teflon tape on the shower arm is necessary before putting it on a holder. The Tape helps provide solid fitting to the shower arm and prevent leaking problems. So you must not miss out on applying Teflon tape on the shower arm.
Do I Need A Plumber To Replace A Broken Shower Head Holder?
Replacing a broken shower head holder is as simple as screwing a bulb in the holder. You just need the right guidance that I have provided in this article. Hiring a plumber will cost you anywhere between 150 to 300 bucks. So, why not save money and do it yourself?
Final Words
There are only two ways to fix a broken shower head; you have to replace it and try some hack to get the most out of a broken one.
Replacing the broken showerhead holder is the best option since it saves your showerhead from accidentally falling on the floor. Make sure you don’t end up costing yourself a showerhead by keeping a compromise with the broken holder.
I hope this guide helps solve your query about how to fix broken shower head holder; if yes, also check out other interesting posts on my blog. PEACE OUT!!!
