Whether you want to give a fresh start to the morning or blow away the tiredness before heading to bed, taking a comfortable shower is what everyone prefers.
But if your shower head has a long mineral deposit and buildup on the surface, it will not provide you with a smooth shower experience.
Instead, it will damage your skin and hair when that dirt buildup and chemicals mix with the water coming out from the shower.
Cleaning is the only way to get your showerhead back to its pristine condition.
Fortunately, You can do it with the help of CLR. It is the quickest and most effective method of removing chemical deposits and dirt buildup from the showerhead.
Let’s take a look to learn how to do it.
See Also: Using vinegar as a more smooth and natural shower head cleaning method.
How do you clean a shower Head with CLR? (Option 1: Without Removing it)
If you’re not a DIY guy and simply don’t want to get into trouble removing and fixing shower heads for cleaning (option 1), this is the best method you can follow.
However, if you want to get more effective cleaning results, you can head on to the next method (option 2), where you have to remove the showerhead when cleaning with CLR.
What You Need
- CLR Multi-Use Cleaner
- Water
- Container (Enough in size to easily submerge your showerhead)
- Old Toothbrush and Scrubber
- Safety Gloves
Step 1: Create A Mixture
First, you need to create a mixture of CLR and water in a container. Use both liquids in equal quantities, like a 50-50 ratio. Avoid making skin contact with CLR liquid since it consists of heavy chemicals. You can use hand gloves to protect yourself. Once the mixture is ready, you’re ready to proceed further.
Step 2: Soak The Shower Head In The Mixture
Pick up the container and dip the showerhead in it for two minutes while handling it. Make sure the shower head is fully immersed in the mixture. Don’t soak the showerhead for more than two minutes. Anything longer than this can damage showerhead material.
Step 3: Scrub The Showerhead
Carefully take the container away from the showerhead once the soaking is completed. You may have noticed some cleaning results on the showerhead, and to make it look more noticeable, you have to scrub it. Use the toothbrush and scrubber to flush out stuck mineral deposits from the showerhead.
Step 4: Clean And Run the Showerhead
Once you’ve done scrubbing, clean the showerhead by flowing hot water on it. Lastly, run the showerhead to flush away mineral deposits if there is any inside. You can now enjoy a refreshing and comfortable shower.
How To Clean A Shower Head With CLR (Option 2: With Removing It)
In the above method, you may have cleaned the showerhead from the outside, but it still doesn’t have noticeable results from the inside.
To ensure your shower head is thoroughly cleaned from the inside as well, you have to remove it before cleaning it with CLR. To do this, you’ve to follow this method.
What You Need
The following things would be needed to proceed with the method.
- CLR Multi-Use Cleaner
- Water
- Wrench
- Container
- Toothbrush and Scrubber
- Hand gloves
Step 1: Remove The Shower Head From Fixture
The first step comes with disassembling the showerhead from the fixture or hose. Use the wrench to unscrew the connecting nut in the anticlockwise direction.
It is recommended to follow the manufacturer’s guide in this regard to avoid damaging the device. Once you successfully unscrew the showerhead from the wall, you’re ready to proceed further.
Step 2: Create A Mixture And Soak Showerhead In It
Now create a mixture in a container with half the quantity of water and half the quantity of CLR. It is recommended to wear gloves to avoid skin contact with CLR.
Soak the Showerhead in the created solution for about two minutes. Make sure it is fully immersed in it. Don’t leave it in the mixture for more than two as it can damage its glossy appearance,
Step 3: Scrub And Clean Showerhead
Take out the showerhead and scrub it with the help of an old toothbrush and scrubber for a more furnished look. Keep repeating the process until it won’t get completely clean. After that, rinse it under a running tap to flush out any loosened grime.
Step 4: Re-install And Enjoy
Once the cleaning process is completed, it’s time to reinstall the showerhead. Follow the reverse of the removing process to install it back. You can also take guidance from the manufacturer’s guide in this regard to prevent any damage. No one can stop you now from taking a smooth, pleasant, and comfortable shower. Enjoy it!
How long Should you leave CLR on the shower head?
Since CLR consists of heavy chemicals, you should have to take extra when using it on showerheads, especially on chrome, brass, and nickel-coated showerheads.
First, create a solution of CLR with water, then soak your shower head in it. Don’t soak directly into CLR without diluting it. You have to leave it in for a maximum of 2 minutes in the mixture.
Any longer than this can damage your showerhead’s appearance. However, if the showerhead is extremely rusty and gross, you can extend the soaking time for a few more minutes to get effective results.
Safety Measures To Follow When Using CLR For cleaning
To save yourself from any hazardous occurrence, you must follow the safety measures before using the CLR for cleaning purposes:
- Use safety gloves to avoid skin contact with CLR when using it.
- Always use CLR in a well-ventilated area.
- The acid in CLR can cause skin irritation so take extra care when working with it.
- Don’t dilute CLR with any other chemical besides water.
- Take it away from the reach of children.
To avoid CLR cleaner dangers, you should practice these safety measures.
Final Words
Cleaning the showerhead with CLR is the best method to get effective results in just a few minutes. It is also the quickest and easy-to-follow process compared to other cleaning methods.
Fortunately, everything you need to know about how to clean a shower head with clr has been described in this article.
Make sure not to make skin contact with CLR when using it for cleaning the shower head. Otherwise, it may cause skin irritation and burning.
I hope this article helps you in some way to know how to clean a shower head with CLR. If yes, do check other interesting posts on my blog.
You May Also Like: How To Clean Black Mold From Shower Head | How To Clean Shower Head Legionella