How To Clean LED Shower Head? [3 Simple Steps]

Like every other showerhead, LED shower heads get dirty so fast, and cleaning them is nothing short of a struggle. Fortunately, by using the right techniques and methods, you can turn your LED shower head back to its pristine condition in no time.

That’s where this article comes in handy. It will walk you through every step explaining how to clean LED shower heads and what to do if they are not working properly.

So, without further ado, let’s get started.

How To Clean LED Shower Head Using Vinegar In 3 Steps

Using Vinegar to clean an LED shower head is considered to be the most effective and easiest method. It involves the usage of a few things such as White Vinegar, Tooth Brush, a Bowl or Bucket, and a Wrench.

Once you have gathered all the things mentioned, it’s time to get into the business of cleaning LED shower heads.

Step 1. Unscrew Your Shower Head

First and foremost, you need to unscrew your showerhead from the wall by rotating in the anti-clockwise direction using a wrench or your hands. While disassembling a showerhead, make sure to cover it with a soft cloth to avoid possible scratches.

However, if you’re using a handheld showerhead, you may need to remove it from the connected hose to continue further with the process.

After removing the showerhead, it’s recommended to check for any signs of rust and corrosion. If you find anything serious, it’s better to replace the shower head instead of cleaning it.

Step 2. Soak the Shower Head In Vinegar 

The next step involves soaking the showerhead in vinegar. For that, you need a large bowl where your shower head will fit perfectly inside. Fill the bowl with white vinegar and soak your LED shower head in it for an hour.

For more advanced cleaning results, you can increase the soaking time to four hours, depending on your needs. The acidity power of vinegar will kill those hard-to-remove stains and dirt from the LED shower head in no time.

Once the shower head has been soaked for the required amount, take it out from the bowl and rinse it under the tap water. You will see a noticeable difference in the look of the showerhead.

For more effective cleaning results, scrub the nozzles of the showerhead with the toothbrush to remove residue or dirt that is clogged inside those small holes. Once done scrubbing, rinse the shower head again in the running water to wash away leftovers from its surface..

Step 3. Re-install The Shower Head

After you have cleaned your LED shower head, now it’s time to screw it back to its previous location. For that, you need to follow the reverse of the process you did while disassembling it.

Don’t forget to cover the showerhead with the cloth when putting it back on to avoid possible scratches. First, you need to wrap the Teflon Tape onto the threads of the shower arm and then install the showerhead by rotating it in a clockwise direction.

Once the LED shower head has been successfully installed, run a test to check for leaks. Unfortunately, if you found any, just tighten the showerhead more firmly using the wrench.

Related: Are Shower Heads Universal? [How To Measure The Fit]

How To Clean An LED Shower Head Using A Plastic Bag

If you don’t want to be in the hassle of removing and reinstalling LED shower heads for cleaning, this plastic bag method is the perfect fit for you. Using this technique, you can clean your shower head without taking it out from the wall.

It’s a more convenient and easiest way to clean LED shower heads but somehow not better than the method mentioned above since it doesn’t clean showerheads thoroughly.

The plastic bag method involves the usage of things including, a plastic bag, rubber band, and white vinegar.

Once you’ve gathered the required things, you’re ready to proceed further to clean your LED shower head using the plastic bag method.

Step 1. Take A Plastic Bag

First, you need to take a plastic bag and fill it with vinegar. Make sure the bag is not torn from any side as the white vinegar will spill onto you. Take a rubber band on the other hand as you will be using it to wrap the vinegar-filled bag onto your LED shower head.

Step 2. Wrap It Around The LED Shower Head

In the following step, you have to wrap the plastic bag around the LED shower head. Remember the rubber band you gathered? Use it to attach the bag firmly to your shower head so it won’t fall onto the floor.

Let the showerhead soak inside the vinegar-filled bag for six hours. The vinegar’s acidic power will remove all the dirt and stains from the shower head during this process.

Step 3. Remove The Plastic Bag From Shower Head

Once the shower head has been soaked for the required time, it’s time to remove the plastic bag from the LED shower head. For more effective cleaning results, you can use the toothbrush to scrub the showerhead after removing the plastic bag. 

Lastly, rinse the showerhead with water and you will be glad to see your LED showerhead back to its former glory. 

Why Is My LED Shower Head Not Working?

Is your LED shower head not working like it previously did? Well, there could be several reasons for that problem which we have briefly discussed below. Let’s take a look at them.

Leaking Water Supply

The first reason that your LED shower head is not working in full swing could be because of a leaky water supply. It can happen because of a worn-out washer in a shower value or there might be leakage from another pipe connecting with your shower head.

To solve this issue, you have to thoroughly inspect the health of the pipes inside your bathroom and check if there’s any leakage to them. If you don’t find any issue then the root cause behind your shower head not working properly would be different.

Let’s check for other possible reasons.

Anode Rod Dysfunctional

If you’re introduced to this term for the first time, let me tell you anode rod is a metal tube that guards your water heater against corrosion.

Consequently, when there are too many minerals inside the water, it would be hard for the anode rod to protect against rust, resulting in the anode rod being dysfunctional.

If you suspect this issue to be the root cause behind the low performance of your LED shower head, you need to replace the anode rod with a new one. You can find this metal tube easily from your nearest hardware store.

Faulty Shower Valve

Another reason behind the low-quality performance of your LED shower head could be a broken shower valve. A shower valve holds the responsibility of regulating water temperature and flow in the shower by mixing hot and cold water.

A broken or faulty shower valve can mess up this whole process, resulting in terrible water performance from your shower head. To solve this issue, you may need to replace the broken shower valve with a new one.

Related: 15 Different Types of Shower Heads: Which One Is Best For You?

Frequently Asked Questions

Why has my LED shower head stopped working?

Your LED shower head most probably stopped working due to a build-up of heavy water gunk, grime, and/or salts inside the shower head, which caused the LEDs to malfunction over time. Regular cleaning and maintenance can help prevent this issue.

How long do LED shower heads last?

LED shower heads can last for a very long time, typically around 100,000 hours. They are powered by running water and do not require batteries. The LEDs can showcase bright colors throughout their lifetime.

Is LED shower head safe?

Yes, LED shower heads are safe to use because they do not require any wiring or connection to your home’s electrical system. They operate using the water flow and are designed with safety in mind.

Is it safe to put LEDs in the shower?

Yes, it is safe to put LED shower heads in the shower. LED shower heads are specifically designed to be waterproof and safe for use in wet environments. They are engineered to function safely without posing any electrical hazards to users.

Do LED shower heads need electricity?

No, LED shower heads do not need electricity. They are powered by the running water in the shower and do not require any electrical connection or batteries to operate the LEDs.


Cleaning an LED shower head is essential for maintaining its pristine condition and ensuring a long-lasting, enjoyable showering experience. 

The article provides two effective methods for cleaning LED shower heads: using vinegar in three simple steps and the plastic bag method for a more convenient approach. You can use the one that suits your needs best.

Nevertheless, regular cleaning can prevent issues such as a decrease in LED performance, which may be caused by build-up and clogging. LED shower heads are a safe and practical addition to your bathroom, as they do not require electricity and are designed to function safely in wet environments.

I hope this article has explained everything you need to know about How To Clean LED Shower Head. If you’ve any questions in your mind, don’t hesitate to ask them below in the comment section.

Read More: 7 Best Massage Shower Heads For Ultimate Relaxation

Hey there, I'm Abdul Moeed Shahid, the DIY aficionado and experienced writer. With a wealth of knowledge gained from years of honing my craft, I bring my expertise to the world of DIY and home improvement projects.

Leave a Comment